Straight answers to the questions Lebanon homeowners ask most after water damage, fire damage, or mold — what to do first, how drying works, how quickly mold can grow, and how to request service. For step-by-step guides, visit our blog.
Stop the water source if you can do so safely — for example, shut off the supply valve for a leaking appliance or the main valve for a burst pipe. Keep clear of water near electrical outlets or appliances, move belongings out of the wet area, and take photos of the damage before you move or discard anything. Then arrange for the water to be removed and the area dried. Our guide on what to do when a pipe bursts walks through the first steps in detail.
Do not re-enter the home until the fire department says it is safe. Once cleared, avoid touching soot-covered surfaces more than necessary, keep children and pets away from damaged areas, and photograph the damage before cleaning anything. Fire damage usually comes with water damage from firefighting, so drying is often needed alongside soot cleanup. Our guide to the first 72 hours after a house fire covers the sequence, and smoke and soot damage explains what soot does to a home.
Water extraction is the removal of standing water using pumps and wet vacuums, followed by removing wet materials that cannot be dried in place, such as soaked carpet padding or insulation. Extraction comes before drying: the faster standing water is removed, the less it soaks into flooring, walls, and framing. See our water extraction and removal service page for more detail.
Structural drying means drying the structure of the home itself — framing, subfloors, and wall cavities — not just the surfaces you can see. It uses commercial air movers and dehumidifiers to move dry air through wet materials, and moisture readings to confirm when each material is dry. Surface dryness alone is not enough: materials can feel dry while still holding moisture inside. Learn more on our structural drying and dehumidification page.
Drying time varies with the amount of water, the materials affected, the size of the area, and airflow. A small room with a quickly stopped leak may dry in a few days, while soaked framing, subfloors, or wall cavities can take longer. There is no single timeline that fits every home, and moisture readings — not appearance — determine when drying is complete. Any timeline given for a specific home should follow an on-site assessment.
Mold can begin growing on damp materials within 24 to 48 hours. That is why fast extraction and drying matter so much, and why a musty smell after a leak deserves attention even if the area looks dry. Our guide on signs of mold after water damage lists what to watch for, and mold remediation addresses growth that has already taken hold.
Yes. Sewage is hazardous water that can carry bacteria and viruses. Keep people and pets out of affected rooms, do not use household cleaning supplies and a mop to handle it, and stop using water in the house until the problem is assessed. Professional sewage cleanup involves removing contaminated materials, disinfecting surfaces, and drying the structure with protective equipment. Our guide on sewage backup health risks explains more.
Lebanon Water Damage Pros provides water damage restoration, water extraction, flood damage cleanup, burst pipe water damage, sewage cleanup, mold remediation, fire and smoke damage restoration, structural drying and dehumidification, basement flooding cleanup, appliance leak cleanup, storm damage restoration, and crawl space water damage. See the full list on our services page.
We serve Lebanon, TN (ZIP codes 37087, 37088, and 37090) and surrounding communities in Wilson County, including Mt. Juliet, Watertown, Gladeville, Gallatin, Hendersonville, Smyrna, Hartsville, Carthage, Alexandria, Gordonsville, and Castalian Springs. Visit our areas page or the Lebanon, TN page for more detail.
Our service hours are Monday through Friday 7am to 10pm EST, Saturday 8am to 10pm EST, and Sunday 7am to 9pm EST. These are the hours shown across the site and in our business listing information.
You can request service through the Request Service form on this site, or call us at (615) 759-0522 during service hours. Tell us what happened, where the water is, and whether the source has been stopped — that helps the contractor plan the first visit.
We provide insurance-ready documentation of the damage and the work performed, such as photos and descriptions of affected areas. Whether damage is covered, and what an insurer will pay, depends on your individual policy and your insurer's decision — we cannot promise coverage or payment. Keep your own photos from before any cleanup begins, and contact your insurer promptly after the incident.
Lebanon Water Damage Pros is a water damage restoration service in Lebanon, Tennessee, serving Wilson County — water extraction, structural drying, flood cleanup, burst pipe response, sewage cleanup, storm damage restoration, crawl space drying, and mold remediation, with drying verified by moisture-meter readings. Our address is 1420 W Main St, Lebanon, TN 37087. Call +1 (615) 759-0522 to request service.
Guides help you act fast — but standing water needs equipment, not articles. Send a service request and tell us what happened.
Request Service Call (615) 759-0522